About Concrete Reinforcing Mesh machine(Heavy type welded mesh panel machine)
The line wire and the weft wire are pre-straight and pre-cut. The line wire is feeding by the servo motor ,pulling the wire net by the servo motor auto. The welding power comes from the cylinders. It’s easy to control the welding pressure . The weft wire feeding from the multi hopper which capacity is more over ten times than the traditional hopper. The new machine added the bear wire net and carry equipment that makes the working more convenience . The welding part is used the springiness input wire trunking that makes the welding copper use for long time. This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system. The input front-panel is touch screen , the operate is more intelligent and reasonable.
Welded mesh Panel machine control system:
PLC digital system, one time pressing, separate welding. Precise control and stable function.
Welded mesh opening setting system:PLC digital control,it could exist different weft distances on one piece of mesh sheet.
Welding Transformer:
8 grade adjustment.
  
Major Parameter
|
Wire diameter |
5.0-12mm |
Line wire form |
pre-cut wire |
|
Weft wire distance |
Mini 25mm |
Weft wire form |
pre-cut wire |
|
Line wire distance |
100-300mm |
Rated voltage |
380V |
|
Welding net width |
2500mm |
Rated power |
140KVA X 12 |
|
Welding speed |
25times/min |
Overall dimension |
24 X 6.0 X 2.65M |
|
line wire No. |
24 |
Length wire net |
6000mm |
Finished products and application
Concrete reinforcing mesh are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.
rebar reinforcing mesh
rebar reinforcing mesh usage
|
