3D Wire Mesh Panel Machine is the main machine of the production line, which adopts PLC control system, air cylinder or step motor as drive. The machine can insert, cut, and control the position of the wire mesh and the EPS boards automatically to complete the production of the 3D panel.
This production line is of high automatic manufacturing level, productive efficiency, low lack welding rate, strong welding pressure and even welding strength.The finished products(3D panels) are in good quality and cost low.
 
3D Wire Mesh panels machine (Also named 3D panels machine , 3D mesh panels machine )Technological parameter
|
Rated Electric Power |
75 KVA |
|
Input Supply |
AV380V 50HZ |
|
Air Source Equipment |
3m3/min 0.6MPA |
|
Suitable Range |
Wick board Thickness |
50mm～100mm |
|
Cutting Wire Structure |
Single or double sides meshdifferent densities |
|
Production Standard |
Standard board |
length |
3000mm |
|
width |
1220mm |
|
Nonstandardboard |
length≤4500mm |
|
MaterialCharacter |
welding diameter |
2-2.5mm(cold-drawing low-carbon steel wire) |
|
wick board |
polystyrene foam board |
|
mesh form |
flat mesh(mesh hole 50*52mm) |
|
lack welding rate |
≤5% |
|
welding intensity |
every point≥330N |
|
Machine Weight |
4000Kg |
|
Overall Dimension |
length |
13500mm |
|
width |
1800mm |
|
height |
1700mm |
Besides the main equipment - 3D panel machine (slant-welding machine),full 3D panel production line still include the following machines:
1.welded mesh welding machine
Main technical data
|
Rated power |
72Kva |
|
Input power source |
AV380V 50HZ |
|
Welding width |
1220mm |
|
Welding Spot |
24 |
|
Welding speed |
45 times/min |
|
Material
|
Wire dia |
Φ1.8-Φ3.5mm |
|
Wire mesh form |
50mm x50mm flat mesh |
|
Loss welding rate
|
≤2% |
|
Welding strength |
Per spot ≥330N |
|
Cuting method |
Automatic shearing machine shear, but the welding speed can not exceed 45 times / min |
|
Weft wire inserting mode |
Cutting the wire to bundles then put into the machine |
|
Weight |
3200kg |
|
Outside Measure
|
L |
2600mm |
|
W
H |
1700mm
1650mm |
2. Steel wire straighten and cutting machine
Straightening axis Speed:2900/min
Straighten production capacity:30m/min
Weight :150kg
Overall Size:3500 x 500 x 1140mm
3. Manual Re-welding machine
Voltage:380V/3P/50HZ
Wire dia:1.5-3.2mm
Instand power:20kva
Welding time: 0.01-2s
Output Voltage:1.5-4.5v
Weight:45kg
4. Wire Winding Machine
It is used for putting the wires.
Power:380V 50Hz
Overall Size :800mm x 800mm x 1100mm
Weight:100kg
Production Capacity:100m/min
Input power:380V 50HZ
5. Air compressor and Air tank
6. All the spare parts
We design,manufacture and install full 3D mesh panel production line for you.
All the 3D panel production line machines meet ISO9001:2000 quality standard.
From this, you will know more infomation about 3D panel.
|
